Board-fit and routing density
The 2132272670: This is a 26-circuit, dual-row receptacle on 1.50mm pitch — the tightest centreline in the CLIK-Mate family. The post side is tin-plated at 39.4 µin, which wets well during reflow and holds the solder joint.
Mating half and terminal lock
This receptacle mates with the CLIK-Mate 1.50mm crimp-type plug housing (e.g., 213229 series). The latch holder is a positive lock: once seated, it won't back out under vibration, which is the failure mode that scraps a harness. For a 26-position connector, the aggregate current through the bundle derates faster than a single-contact rating would suggest; the harness designer should budget a 30% derate from the per-contact maximum when all circuits are loaded.