TE Connectivity AMP Connectors 1102 Series — te-connectivity-amp-connectors Interconnect Component

TE Connectivity AMP Connectors 1102 Series from te-connectivity-amp-connectors offers 94 variants covering board-to-board, wire-to-board, and cable assembly interconnect configurations. This series is specified by PCB designers, harness manufacturing engineers, and field service technicians for applications requiring reliable, mechanically robust electrical connections with standardized form factors.

What This Interconnect Series Provides

Connectors within this series provide the physical and electrical interface between printed circuit boards, between a PCB and discrete wires in a cable harness, or between two cable assemblies. The connector design — contact geometry, plating material and thickness, housing locking mechanism, and insulator material — determines the electrical performance (contact resistance, current capacity), mechanical reliability (mating cycles, vibration resistance), and manufacturability (compatible assembly process) of the final interconnection.

Key Selection Parameters

Typical Applications

• PCB Assembly and System Integration: Board-to-board stacking, mezzanine card connections, and programming/debug header interfaces in embedded computing platforms, industrial single-board computers, and consumer electronics mainboards.
• Wire Harness and Cable Assembly Manufacturing: Crimp-and-poke or insulation displacement termination for internal wiring in home appliances, automotive interior and body electronics, HVAC equipment, and industrial control panels.
• Field-Serviceable Equipment: Modular connector systems enabling rapid module replacement without re-wiring — essential for building automation controllers, security and access control panels, commercial LED lighting fixtures, and telecommunications network equipment.

Assembly and PCB Design Guidance

For surface-mount variants, verify that the PCB land pattern matches the manufacturer-recommended footprint in the product datasheet or the corresponding IPC-7351 compliant footprint. Through-hole variants require adequate hole diameter and annular ring per IPC-2221 for the specified lead dimensions. For crimp connectors, use the manufacturer-specified crimp tool and die set — generic or substitute tools may not achieve the specified crimp height, pull force, or gas-tight connection required for long-term reliability.

When designing multi-connector PCB layouts, leave adequate clearance around each connector for the mating connector body, cable bend radius, and operator hand access during assembly and field service. For high-pin-count or fine-pitch connectors, consider adding fiducial marks near the connector footprint to aid automated optical inspection (AOI) after SMT assembly.

Mating Compatibility

When ordering, verify that the PCB header, receptacle housing, and crimp terminal contacts are all from the same connector family and manufacturer series. While connectors at the same nominal pitch from different manufacturers may mechanically appear to mate, the contact normal force, plating material compatibility, precise pin-to-socket alignment, and rated mating cycle life may differ significantly. For critical applications, validate cross-manufacturer compatibility through electrical continuity and mechanical retention testing before committing to an alternate source.

Availability

Standard catalog configurations — common pin counts, gold flash or tin plating, and single/dual-row layouts — are typically commodity items with broad distributor stock and same-day shipment from te-connectivity-amp-connectors franchised distributors including Digi-Key, Mouser, Arrow, and Newark/Farnell. Custom pin counts, heavy gold plating (30µ" Au), or non-standard post lengths for specific board-to-board stacking heights may require 4-8 week manufacturing lead times.