Skip to main content
Log in
TE Connectivity AMP Connectors 1-102155-0 — Pin Headers, Sockets & Housings

1-102155-0 TE AMP-Latch Header, 50P, 0.100" Pitch, Shrouded

MPN1-102155-0
Active

TE Connectivity AMP-Latch 1-102155-0, 50-position dual-row shrouded header, 0.100" (2.54mm) pitch, through-hole solder termination, 1A per contact, 15µin gold mating finish, UL94 V-0 black housing.

$5.8057Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 1-102155-0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

1-102155-0 key specifications
ParameterValue
SeriesAMP-Latch
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating250VAC
Current rating1A per Contact
Operating temperature-65°C~105°C
Insulation colorBlack
Insulation height0.549\" (13.94mm)
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire

All specifications

1-102155-0 additional specifications
ParameterValue
PackageTray
FeaturesKeying Slot, Mounting Flange
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions50
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin-Lead
Contact length - post0.155\" (3.94mm)
Overall contact length0.684\" (17.37mm)
Contact finish - matingGold or Gold-Palladium
Contact length - mating0.240\" (6.10mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

50-Position Dual-Row Header for AMP-Latch Ribbon Cable

The 1-102155-0 is a 50-position, dual-row male pin header from the TE AMP-Latch series. It mates with the standard AMP-Latch IDC receptacle, making it the board-side half for a 50-conductor ribbon cable interconnect. Rated 1A per contact at 250VAC, this is a signal-level header — not for power distribution. The mounting flange provides a screw-down option to take cable strain off the solder joints.

Through-hole mounting with a 0.155" (3.94mm) post length — the solder tails protrude below the board enough for a solid wave-solder fillet but stay short enough to avoid bottom-side component clash. Row spacing is also 0.100" (2.54mm), so the 50 positions occupy a 0.500" x 0.100" footprint on the board. The 0.549" (13.94mm) insulation height means the shroud stands well above the PCB surface, leaving clearance for components under the cable exit.

The base product number is 102155; the 1-102155-0 is the fully specified variant.

Frequently asked questions

Does the 1-102155-0 have a keying slot to prevent mismating?

Yes, the header includes a keying slot. This polarises the connection so only a matching keyed AMP-Latch receptacle can be mated, preventing reverse insertion or use with a non-keyed cable assembly.

Is the 1-102155-0 RoHS compliant?

The contact finish on the post is tin-lead, which is not RoHS-compliant. The mating finish is gold or gold-palladium. Verify the full compliance status with the manufacturer or your compliance team for the exact application.