The Amphenol FCI 68022-236HLF is a 36-circuit dual-row BERGSTIK II header in the 0.100 inch (2.54 mm) pitch family, right-angle through-hole mount with push-pull fastening. Phosphor bronze contacts carry 5 A per circuit at 110 V, finished with 15.0 µin (0.38 µm) gold over the mating interface — the plating grade that separates this from tin-plated signal-duty headers in the same series. The unshrouded header sits 0.240 inch (6.10 mm) above the board when mounted, with 0.318 inch (8.08 mm) engagement length and 0.110 inch (2.79 mm) post lead-in.
Board-to-board signal and low-level power routing at 0.100 inch pitch is the bread-and-butter of the BERGSTIK II line — the 36-position count covers mid-density interconnects where a single-row header would exceed board width, and dual-beam square pins seat positively in matching IDC receptacles or machine-pin sockets. UL94 V-0 housing material handles the thermal duty of wave-solder reflow without deformation.
Mates with any standard 0.100 inch pitch dual-row receptacle or IDC socket that accepts a 0.318 inch (8.08 mm) pin engagement length — verify the receptacle's slot depth against the 8.08 mm figure before committing. The push-pull fastening type relies on header body geometry for retention; no separate locking feature is present, so this is suited to stable board-to-board configurations rather than high-vibration environments where a latching or screw-fixed pair would be appropriate.