The Amphenol FCI BERGSTIK II 68022-240HLF is a 40-position dual-row board-to-board header with 0.100" (2.54 mm) pitch, right-angle through-hole termination, and push-pull mating. Gold-plated phosphor bronze contacts carry 5 A per circuit at 110 V — the 15.0 µin (0.38 µm) plating grade puts this at the durable end of the BERGSTIK II range, better suited to repeated mate/de-mate cycles than standard tin. The UL94 V-0 black housing meets the flammability ceiling common in industrial automation and telecom backplane assemblies. All 40 positions are loaded, so the full 40-circuit complement is ready to accept the matching receptacle at assembly.
Board layout fit
The right-angle orientation places this flush against the board edge for parallel board-to-board stacking. The 0.240" (6.10 mm) insulation height and 0.110" (2.79 mm) post length define the mated stack-up — confirm the z-height budget and keep-out zone against the mating receptacle's pin protrusion. Row spacing matches the 0.100" pitch at 0.100" (2.54 mm), so the footprint is a standard dual-row 0.100" grid — routing density is driven by the 40-position count and the board stack-up geometry rather than any non-standard pitch.
What drives sourcing and BOM commitment
Listed as Active — quotable to order against the BOM quantity. The pitch, position count, and right-angle THT footprint are fixed to the BERGSTIK II series footprint, so confirming the circuit count match on the BOM line is the first action before committing. No official cross-reference successor is on record — when specifying into a long-run product, verify whether a preferred-movement or last-time-buy notice has published separately.