What this connector is
The Amphenol 68022-434HLF is a dual-row, 34-position board-to-board header in the BERGSTIK II series — an unshrouded, push-pull male pin header sized for 0.100" (2.54mm) row and pitch spacing. Right-angle through-hole termination mounts flush to the PCB edge; the square pin profile suits matching IDC or friction-fit receptacles in low-to-medium-density interconnects. UL94 V-0 rated black housing material supports use in enclosed equipment where flame-retardance is a panel or system-level compliance requirement.
What the ratings mean for the fit
The 0.100" pitch is the standard grid for the full BERGSTIK II family — any receptacle or housing that accepts a 0.100" pitch dual-row header at the matching position count is a candidate mating half. The 34 positions represent the full complement of circuits on this part; all positions are loaded. 5 A per circuit at 110 V covers signal and low-level power distribution in industrial control, instrumentation, and embedded computing — the tin plating is adequate for permanent or semi-permanent mated pairs; the push-pull fastening without positive latch means this is not a high-vibration locking system.
Lifecycle and sourcing
The 68022-434HLF carries Active lifecycle status — currently in normal production and sourced to order against BOM quantity. No official EOL notice or LTB date is on record; no formal successor order code is listed in the ledger. For new designs the 34-position count and right-angle through-hole footprint are the primary confirmation points before committing to an RFQ.