What this connector is
The Amphenol FCI 68023-411HLF is the 11-circuit member of the BERGSTIK II unshrouded header series — a single-row, 0.100" (2.54 mm) pitch board-to-board male pin header with square contacts and a push-pull right-angle body that solders through-hole to the PCB. Contacts are phosphor bronze with tin plating on both the mating face and the solder tail, at 100.0 µin (2.54 µm) thickness across the mating interface — a finish suited to the connector's rated 5 A per circuit at 110 V in unpowered or low-cycle service. The housing is UL94 V-0 rated black thermoplastic with 0.095" (2.41 mm) insulation height; all 11 positions are loaded. Post length is 0.305" (7.75 mm) from the board surface, which gives adequate stand-off for most wave-solder process windows.
What the ratings mean for your layout and duty
Pitch and position count are the two dimensions that drive footprint: 0.100" (2.54 mm) pitch with 11 circuits in a single row. Check that your PCB pad pattern and routing channel clear the header body before committing the BOM line. 5 A per circuit at 110 V is the headline figure, but the tin-on-tin plating and the absence of a high-cycle gold option mean this is suited to permanent or low-reconnection installs rather than field-serviced positions. The UL94 V-0 rating confirms the housing material does not support combustion propagation — useful in enclosed equipment bays. Right-angle through-hole mounting is directional: the connector mounts flush to the PCB face and the mating interface projects perpendicular to the board plane. If your board stack demands a straight vertical entry instead, this right-angle orientation is a hard mismatch regardless of pitch or position count.
Where this connector is used
Lifecycle and sourcing posture
The 68023-411HLF carries an Active product status. It is quoted to order against BOM quantities with no official successor or cross-reference on record — confirm the 11-position circuit count matches your board layout before releasing the purchase order.