The Amphenol FCI (Amphenol FCI) 86832-150HLF is the 50-circuit member of the BERGSTIK II board-to-board header series. It carries square male pins on a dual-row 0.100-inch (2.54 mm) pitch, terminated through-hole for wave or hand soldering. All 50 positions are loaded. Gold or Gold GXT contact plating at 30.0 µin (0.76 µm) covers the mating surface, giving the 5 A per-circuit rating meaningful reconnection durability for development, production, and service-interconnect applications.
What the ratings mean
The push-pull fastening type relies on header-body friction and pin engagement rather than a latch clip; verify that the mated height is locked in vibration-exposed layouts.
Board layout fit
The through-hole mount with 0.100-inch (2.54 mm) row spacing and 0.100-inch (2.54 mm) post length suits standard 0.100-inch grid PCBs. The insulation height of 0.100 inch (2.54 mm) sets the mated stack profile when this header is used as the board-side stacking member. Overall contact length is 0.525 inch (13.34 mm); the board designer should confirm the z-axis clearance against the mating receptacle's pin-length requirements to avoid stubbing the pin on the housing floor during assembly.