The Amphenol FCI 86832-162HLF is a 62-circuit dual-row board-to-board header in the BERGSTIK II series, terminated by through-hole solder pins on a 0.100" (2.54 mm) grid. The push-pull male pin interface is unshrouded — this is a bare stacking header, not a latched or keyed board-to-wire plug. All 62 positions are populated with square phosphor bronze contacts finished in gold or Gold GXT at 30 µin (0.76 µm) on the mating face. Rated 5 A per contact at the board-stack interface, with a 110 V voltage ceiling. The UL94 V-0 black polyphenylene housing sets the flammability class for the build-to-print harness — relevant for any end-product certification.
What this means for your BOM and mating half
62 positions at dual-row 0.100" pitch. The mated insulation height is 0.100" (2.54 mm) and the overall contact length is 0.525" (13.34 mm), with the post extending 0.100" (2.54 mm) past the board. The mating half needs to be the matching dual-row BERGSTIK II receptacle — this header is not compatible with standard 0.100" single-row IDC plugs or shrouded headers from other families. The push-pull fastening has no positive latch — board separation is governed entirely by the mating depth of the receptacle and the board stack height tolerance. If the end product sees vibration or thermal cycling, the mated pair needs passive retention from the board layout or a secondary mechanical capture.
Sourcing and production status
Listed Active — quoted to order against BOM quantity. No official LTB date or successor order code for this MPN. The 62-position count is series-specific; sourcing alternates within BERGSTIK II should be checked against the base product number 86832 for position variants before assuming a cross-reference.