What this connector is
The Amphenol FCI (Amphenol FCI) 95687-102HLF is the 2-circuit member of the BERGSTIK II dual-row header series, built as a board-to-board push-pull header with through-hole solder tails. Phosphor bronze contacts carry 5 A per circuit at 110 V, and the mating interface is finished with 30.0 µin (0.76 µm) gold plating over the full contact length — a heavier deposit than the thin flash grades, which translates to reconnection durability rather than just first-mate conductivity.
How it fits the board
The 0.100 inch (2.54 mm) row spacing is the standard pitch the series is built around — the same grid Amphenol FCI has held across the full BERGSTIK II line, so routing density and keep-out match what the rest of the family uses. With only 2 positions (one row populated), this is the series' smallest circuit-count variant; the insulation height of 0.100 inch (2.54 mm) sets the mated stack profile, and the 0.360 inch (9.14 mm) post length gives standard PCB engagement depth for through-hole reflow or wave-solder assembly. The unshrouded header accepts any compatible BERGSTIK II receptacle with the matching dual-row footprint — keying is handled by the housing-to-header interference fit, not a shroud wall.