The 95687-150HLF is the 50-circuit dual-row member of the BERGSTIK II unshrouded male pin header series, 0.100" (2.54mm) pitch, intended for board-to-board stacking at the card edge. Gold-over-nickel contact plating at 30 µin (0.76 µm) covers the mating interface — a grade that supports repeated mate/de-mate cycles better than tin. Rated 5 A per circuit at 110 V, it is a signal-class header where the current headroom, not the pitch, limits power duty to low-level distribution.
Through-hole solder termination with 0.360" (9.14 mm) post length and 0.820" (20.83 mm) overall contact length sets the target engagement depth for the mating receptacle. Push-pull fastening holds the pair together without hardware — the header relies on the receptacle's friction lock to stay mated, so confirm the mating half carries a positive retention feature before specifying.
The header mates with any 0.100" dual-row BERGSTIK II or equivalent 2.54 mm pitch receptacle housing carrying 50 positions on matching 0.100" row spacing. Confirm the receptacle's retention style — push-pull, friction-latch, or friction-clip — because the 95687-150HLF itself carries no locking feature and depends on the mating half to stay seated in service or under vibration.