What This Connector Is
The Amphenol ICC 95687-402HLF is the 2-position member of the BERGSTIK II series — a dual-row, 0.100 inch (2.54mm) pitch male header intended for board-to-board stacking. Contacts are square-pin phosphor bronze with tin plating on both the mating face and the solder tail, rated 5 A per circuit at up to 110 V. The through-hole body seats directly into a PCB and holds a 0.100 inch (2.54mm) insulation height when mated with the matching receptacle.
Ratings That Drive Selection
5 A per contact at 110 V puts this header in low-level power and signal territory — fine for board-level power rails, control signals, or indicator connections where the 2-circuit count matches the BOM line. The tin plating at 100.0 µin (2.54 µm) thickness is standard for solder-assembled boards; it handles the assembly reflow profile without degradation but is not optimised for high-cycle reconnect duty. UL94 V-0 flammability rating means the housing material meets the panel and enclosure compliance floor for most industrial and commercial equipment.