The Amphenol ICC 95687-416HLF is a 16-circuit, dual-row male pin header from the BERGSTIK II series, configured for board-to-board interconnect at the standard 2.54 mm (0.100-inch) pitch. Through-hole solder termination and phosphor bronze contacts rated 5 A per circuit make it a practical choice for signal and low-power routing on dense PCB assemblies, while the UL94 V-0 black housing delivers the flame-retardance required in industrial and consumer electronics enclosures. All 16 positions are populated, and the push-pull fastening type holds the mated pair without a locking latch — a fit consideration in high-vibration environments.
Row spacing of 0.100 inch matches the mating pitch, forming a uniform 2x8 grid. At 110 V the board designer can route power and ground on the outer columns without violating pitch-clearance rules. The insulation height of 0.100 inch defines the stack contribution in board-to-board configurations.