The Amphenol FCI (now Amphenol ICC) 95687-470HLF is the 70-position member of the BERGSTIK II series — a dual-row, unshrouded male header in 0.100 inch (2.54 mm) pitch designed for board-to-board stacking in industrial and instrumentation applications. The push-pull fastening type and through-hole solder tail define its board attachment and mating withdrawal feel; the square male pin profile accepts the matching dual-row BERGSTIK II receptacle.
Contact finish is tin on both the mating face and the solder-post side at 100.0 µin (2.54 µm) — a tin-on-tin grade suited to the connector's 5 A per circuit rating and the board-to-board signal/low-power application envelope. The 110 V voltage rating is the headline limit; derate per the manufacturer's curves above the ambient temperature ceiling to stay inside the connector's real current-carrying window. The phosphor bronze contact body provides mechanical compliance across the square pin cross-section, and the UL94 V-0 insulation body sets the material fire-retardance qualification for industrial equipment enclosures. All 70 circuits are loaded. The 0.360 inch (9.14 mm) post length accommodates multi-layer boards with adequate stand-off above the PCB surface; the 0.100 inch (2.54 mm) insulation height defines the contact spacing on the board side of the interface. Without shrouding, keying and polarisation rely on the housing or the board footprint — verify the pad array and routing clearance match the full pin grid.
Mates with the matching BERGSTIK II dual-row receptacle housing in the same 0.100 inch (2.54 mm) pitch and 70-position configuration. The 0.100 inch (2.54 mm) row spacing equals the contact pitch on both axes — a uniform square grid that demands a board with the corresponding pad array and routing clearance between rows. Verify the housing polarisation features (if any) against your board-keying requirement before pairing.