Skip to main content
Log in
031-2264-RFX — Amphenol product photo
Amphenol

Amphenol RF 031-2264-RFX TNC Jack, 11 GHz, 50 Ohm

MPN031-2264-RFX
Active

Amphenol RF TNC jack, female socket, 50 Ohm, 11 GHz, 500 V, bulkhead front-side nut mount, crimp termination, 7-piece kit, RG-59/62/140/210 cable groups.

$7.3058Ref. price · indicative, final on quote
031-2264-RFX datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

031-2264-RFX Technical Specifications
ParameterValue
Mounting typePanel Mount
Connector typeJack, Female Socket
Fastening typeThreaded
Voltage rating500 V
Frequency - max11 GHz
Mounting featureBulkhead - Front Side Nut
Cable groupRG-59, 59B, 62, 140, 210, Belden 8241, 8263, 8279, 9209
Operating temperature-65°C~165°C
Body materialBrass
Housing colorSilver
Dielectric materialPolyoxymethylene (POM) Acetal
Center contact materialPhosphor Bronze
PackageBulk
Includes7 pcs - 1 Connector, 1 Contact, 1 Ferrule, 1 Gasket, 1 Insulator, 1 Lockwasher, 1 Nut
Impedance50Ohm
Body finishNickel
Mating cycles500
Insertion loss0.18dB
Number of ports1
Shield terminationCrimp
Contact terminationCrimp
Center contact platingGold

Product details

TNC Jack, 11 GHz, 50 Ohm — Bulkhead Kit for RG-59/62/140/210

The 031-2264-RFX: The jack comes as a 7-piece kit (connector, contact, ferrule, gasket, insulator, lockwasher, nut) — one order code covers the full cable termination hardware for a single coax end.

Cable Group Fit and Termination

This TNC jack is sized for RG-59, 59B, 62, 140, 210, and Belden 8241, 8263, 8279, 9209 cables. The dielectric is polyoxymethylene (POM) acetal, and the body is brass with nickel finish.

Mating Cycles and Voltage Rating

The voltage rating is 500 V, sufficient for RF signal paths and low-power DC bias feeds through the same coax.

Frequently asked questions

What cable groups does 031-2264-RFX work with?

The 031-2264-RFX is compatible with RG-59, 59B, 62, 140, 210, and Belden 8241, 8263, 8279, 9209 cables. The crimp ferrule and centre contact are sized for these specific coax types.

Does 031-2264-RFX include all parts needed for installation?

Yes, the 031-2264-RFX ships as a 7-piece kit containing the connector body, centre contact, ferrule, gasket, insulator, lockwasher, and nut. One order code covers the full hardware for terminating one coax end.