Skip to main content
081-114-RFX — Amphenol product photo

Amphenol RF 081-114-RFX Mini-UHF Plug, 50 Ohm, 2.2 GHz

MPN081-114-RFX
Active

Amphenol RF Mini-UHF plug, male pin, 50 Ohm, crimp termination, for RG-8X/Belden 9258/LMR-240, 2.2 GHz max, 335 V, 500 mating cycles, nickel-plated brass body.

$6.2943Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

081-114-RFX Technical Specifications
ParameterValue
Mounting typeFree Hanging (In-Line)
Connector typePlug, Male Pin
Fastening typeThreaded
Voltage rating335 V
Frequency - max2.2 GHz
Cable groupRG-8X, Belden 9258, LMR-240
Operating temperature-55°C~85°C
Body materialBrass
Housing colorSilver
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBrass
PackageBulk
Impedance50Ohm
Body finishNickel
Mating cycles500
Number of ports1
Shield terminationCrimp
Contact terminationCrimp
Center contact platingGold

Product details

Mini-UHF Plug for RG-8X-Class Cables

The 081-114-RFX is listed for RG-8X, Belden 9258, and LMR-240 — all roughly 0.195-inch-diameter 50 Ohm cables common in short-run antenna feeds, jumpers, and indoor distribution. The crimp-on shield termination gives a consistent 360° ground bond that a clamp or solder lug cannot match, which matters for keeping the VSWR clean up to 2.2 GHz. The 500 mating cycles rating reflects the gold-plated centre contact; the threaded coupling nut provides vibration-resistant retention once tightened finger-tight plus a quarter turn with a wrench.

Frequently asked questions

Does the 081-114-RFX require a crimp tool?

You need the correct crimp die set for the cable jacket diameter — no soldering required.