Skip to main content
Amphenol 082-5380-RFX

082-5380-RFX N Type Plug, 50 Ohm, 11 GHz, Weatherproof

MPN 082-5380-RFX
Active

Amphenol RF 082-5380-RFX, N Type plug, male pin, 50 Ohm, 11 GHz, weatherproof, crimp termination, bulk package includes connector, contact, ferrule.

$8.8300 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

082-5380-RFX key specifications
ParameterValue
MountingFree Hanging (In-Line)
Connector typePlug, Male Pin
Fastening typeThreaded
Voltage rating1500 V
Frequency - max11 GHz
IP ratingWeatherproof
Cable groupRG-59, 59B, 62, 140, 210, Belden 8241, 8263, 8279, 9209
Operating temperature-65°C~165°C
Body materialBrass
Housing colorSilver
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBrass

All specifications

082-5380-RFX additional specifications
ParameterValue
PackageBulk
Includes3 pcs - 1 Connector, 1 Contact, 1 Ferrule
Impedance50Ohm
Body finishNickel
Mating cycles500
Insertion loss0.15dB
Number of ports1
Shield terminationCrimp
Contact terminationCrimp
Center contact platingGold

Product details

N Type Plug for Outdoor RF Runs

The 082-5380-RFX: It comes as a three-piece kit — connector body, crimp contact, and ferrule — so you terminate the cable in one operation. The threaded coupling and weatherproof rating mean this connector holds its seal on antenna feeds, base station jumpers, and outdoor test points where a BNC or SMA would let moisture creep past the interface.

This plug accepts RG-59, RG-62, RG-140, RG-210, and the Belden equivalents 8241, 8263, 8279, and 9209.

Weatherproofing Reality

Weatherproof only when fully mated and the threaded coupling is torqued down — the seal relies on the interface compression between the plug and jack faces. If the connector sits unmated on a dangling cable between shifts, the open end is not sealed. Cap the open half with a weatherproof N Type dust cap to keep the dielectric dry. The PTFE insulator inside handles -65°C to 165°C, so this connector survives roof-top thermal cycling without the centre conductor shifting.

MPN
082-5380-RFX