240-Position DDR2 DIMM Socket with Board Locks and Latches
The 10005639-11159LF is a 240-position DIMM socket from Amphenol ICC (FCI), designed specifically for DDR2 SDRAM modules. Gold contact finish at 3.00 µinch (0.076 µm) provides a corrosion-resistant mating interface for the DDR2 memory channel. While adequate for standard assembly and limited rework cycles, this flash thickness is not intended for high-frequency module swapping — treat it as a single-install or occasional-service connector. Integrated board locks anchor the socket to the PCB during wave soldering, and the latches on each end secure the DIMM module against vibration and thermal cycling — a hand-tight latch click should hold it, but a half-turn loose on the board lock could cause a dropout in high-shock environments.