26-Position 0.50mm Pitch FPC Connector with Flip-Lock Actuator
The 10051922-2610EHLF is a 26-position FPC connector from Amphenol ICC (FCI)'s VLL series, built on a 0.50mm pitch — the tight spacing drives the board footprint and limits the per-contact current to 0.5A, which is typical for signal-level FPC interconnects in compact electronics. It uses a ZIF (Zero Insertion Force) flip-lock actuator with a backlock feature — the actuator flips down to clamp the FPC without stressing the contacts during insertion, and the backlock prevents accidental release under vibration. The connector is surface-mount, right-angle, with a mated height above board of 1.30mm — the low profile suits board-edge routing in space-constrained handheld or portable devices.
Contact Plating and Environmental Rating
Gold contact finish at 2.00µinch thickness on copper alloy contacts — the thin gold layer is sufficient for occasional mating cycles in consumer electronics but not rated for high-cycle industrial applications; the 20 mating cycles typical for this series (per peer data) confirm it is designed for limited reconnection duty.
Cable Compatibility and Locking Mechanism
RoHS compliant.