Board-fit and routing reality for a 2.00mm unshrouded header
The 10075024-G01-08ULF: In a board-to-board or cable-to-board application where the connector is unmated for rework or test, 30 µinch gold gives a solid cycle life well into the hundreds of matings before contact resistance drifts.
What mates with this header and how the push-pull works
Unshrouded means the mating receptacle — a Minitek 2.00mm female socket housing — slides directly over the pins with no shroud to guide or protect alignment. The push-pull fastening is just the friction of the contact interface; there is no latch or lock. That makes this header best for applications where the mated connection stays put and vibration is low — think internal board-to-board links or cable harnesses inside a chassis. The 0.157" (4.00mm) mating pin length gives the female contact enough wipe distance to establish a clean interface. Overall contact length is 0.295" (7.49mm) — the pin protrudes 4.00mm above the insulation surface, so the mating receptacle needs to clear that height plus the housing thickness.