Right-Angle Board-to-Board or Cable Header, 10 Positions
The 10129382-910004BLF: Mating pitch is 0.100" (2.54mm) with a matching row spacing of 0.100" (2.54mm), so it pairs with standard 0.100" IDC sockets or crimp receptacles. The gold finish supports repeated mating cycles in field-service or test-fixture environments — the thin flash is adequate for moderate cycle counts, not high-wear applications.
Termination and Board Fit
Termination is solder through-hole. The header is unshrouded with a push-pull fastening type — no locking latch, so it relies on friction retention from the mating connector. For vibration-prone environments, consider a shrouded header or add a secondary retention method.