Amphenol ICC (FCI) Minitek® 1.50mm, 4-position, single-row, right-angle SMT receptacle, tin-plated forked contacts, rated 2 A at 100 V, with latch holder retention.
| Parameter | Value |
|---|---|
| Series | Minitek® 1.50mm |
| Type | Forked |
| Mounting | Surface Mount, Right Angle |
| Connector type | Receptacle |
| Fastening type | Latch Holder |
| Voltage rating | 100V |
| Current rating | 2A |
| Operating temperature | -40°C~125°C |
| Contact material | Copper Alloy |
| Insulation height | 0.250\" (6.35mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Pick and Place Cap, Solder Retention |
| Termination | Solder |
| Rows | 1 |
| Pitch | 0.059\" (1.50mm) |
| Positions | 4 |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
The solder retention feature and pick-and-place cap support automated assembly — the cap protects the contacts during reflow and the retention pads hold the part in place before soldering.
The copper alloy contact material carries the current without excessive resistance rise.
If the BOM calls for 4 circuits, the 2-position part won't fit; no pin-to-pin compatibility.
No stock-holding claim is made; availability is confirmed per inquiry.
The latch holder on this receptacle engages the corresponding latch on the header for vibration-resistant retention.