What This BNC Kit Includes and Where It Fits
The 112517: That means a single order code covers everything needed to terminate a coaxial cable to a bulkhead — no separate sourcing of the crimp ferrule or sealing gasket. The 500 V rating is typical for BNCs and handles bias voltages and signal-level potentials without issue.
This jack is listed for RG-179 and RG-316 Double Braid cable, plus the M17/152-RD316 equivalent. Those are the thin-diameter 50 Ohm coax types common in patch cords and test leads.
Mounting and Environmental Range
That means the panel hole is the only access needed; no reaching behind the panel to thread a nut.
The difference is shield termination: the 112517 uses a crimp shield (ferrule included in the kit), while the 112553 uses a solder shield. If your assembly process is set up for crimp tooling and you want the speed of a hex crimp on the braid, the 112517 is the pick. If you are hand-building prototypes or repairing in the field with only a soldering iron, the 112553 avoids the need for a crimp die.
