Skip to main content
Log in
132240RP — Amphenol product photo
Amphenol

Amphenol RF 132240RP RP-SMA Jack, Male Pin, 50 Ohm, 12.4 GHz

MPN132240RP
Active

Amphenol RF RP-SMA jack, male pin, 50 Ohm, 12.4 GHz, gold brass body, crimp shield termination, solder contact, free hanging inline, 500 mating cycles, bulk pack includes connector, contact, ferrule.

$7.9000Ref. price · indicative, final on quote
132240RP datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

132240RP Technical Specifications
ParameterValue
Mounting typeFree Hanging (In-Line)
Connector typeJack, Male Pin
Fastening typeThreaded
Voltage rating375 V
Frequency - max12.4 GHz
Cable groupRG-8X, Belden 9258, LMR-240
Operating temperature-65°C~165°C
Body materialBrass
Housing colorGold
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBeryllium Copper
PackageBulk
Includes3 pcs - 1 Connector, 1 Contact, 1 Ferrule
Impedance50Ohm
Body finishGold
Mating cycles500
Number of ports1
Shield terminationCrimp
Contact terminationSolder
Center contact platingGold

Product details

The 132240RP: The RP-SMA interface swaps the gender of the center contact compared to standard SMA — the jack carries the male pin, so it mates with an RP-SMA plug that has a female socket. This reversal is common in Wi-Fi access points and antenna ports where the standard SMA pin would be exposed.

Cable Groups and Field Assembly

This jack is specified for RG-8X, Belden 9258, and LMR-240 cables — all 50 Ohm flexible coax types around 0.195-inch diameter. The crimp ferrule and solder cup are sized for these cable groups; using a different coax requires verifying the dielectric OD and braid diameter against the ferrule ID.

Frequently asked questions

What is the impedance and frequency range of 132240RP?

The connector is a 50 Ohm design rated to 12.4 GHz maximum frequency.