Skip to main content
Log in
132255RP — Amphenol product photo
Amphenol

Amphenol 132255RP RP-SMA Jack, 50 Ohm, 18 GHz, End Launch

MPN132255RP
Active

Amphenol RP-SMA jack, male pin, 50 Ohm, 18 GHz, 1 port, board edge end launch, solder termination, gold-plated brass body, bulk.

$10.3800Ref. price · indicative, final on quote
132255RP datasheet
StockIn Stock (26)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

132255RP Technical Specifications
ParameterValue
Mounting typeBoard Edge, End Launch
Connector typeJack, Male Pin
Fastening typeThreaded
Voltage rating375 V
Frequency - max18 GHz
Operating temperature-65°C~165°C
Body materialBrass
Housing colorGold
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBeryllium Copper
PackageBulk
Impedance50Ohm
Body finishGold
Mating cycles500
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

RP-SMA Jack, Male Pin — 50 Ohm End Launch for 18 GHz Links

The Amphenol 132255RP is an RP-SMA jack with a male centre pin, built for board-edge end-launch mounting. The reversed polarity (RP) means the centre contact is male while the outer thread remains standard SMA — a detail that matters when ordering the mating cable assembly: an RP-SMA plug carries a female centre socket, so the two pair correctly.

500 Mating Cycles — Gold-Plated Contact and Threaded Fastening

The threaded coupling (fastening type: threaded) locks the pair together mechanically, so the connection holds under vibration without relying solely on the centre contact beam force.

Board Edge, End Launch — PCB Footprint and Solder Termination

This jack is designed for board edge, end launch mounting, meaning the connector body sits at the PCB edge and the signal pin solders directly to a trace that runs to the board edge. The shield termination is solder as well — both centre contact and shield are soldered, so no crimp tooling is needed. The single-port, bulk-packaged part is a straightforward fit for prototype runs or production where the RF launch is at the board perimeter.

Frequently asked questions

What is the impedance and connector type of 132255RP?

The 132255RP is an RP-SMA jack with a male centre pin, rated at 50 Ohm impedance. The reversed polarity means the centre contact is male — opposite of a standard SMA jack — so the mating cable assembly must be an RP-SMA plug with a female centre socket.

How many mating cycles and what body material does 132255RP have?

Rated for 500 mating cycles.