FME Plug for RG-58-Class Cables — 50 Ohm, 200 MHz Ceiling
The 192100: It mates with any standard FME jack via the threaded coupling nut, giving a secure, vibration-resistant connection that holds up to 500 mating cycles.
Cable Fit and Termination — Solder Centre, Crimp Shield
This plug is rated for RG-58, 58A, 58B, 58C, 141, 303, LMR-195, Belden B7806A, and 9907 — the common 50 Ohm flexible and semi-rigid cables used in mobile radio, GPS, and short-run RF links. The centre pin is soldered to the conductor, and the shield is captured by the crimp ferrule over the cable jacket. The PTFE dielectric body handles the temperature range of the cable group without cold flow or dielectric breakdown at the 200 MHz max operating frequency.
50 Ohm Impedance, 200 MHz Bandwidth
The 50 Ohm impedance is standard for the FME interface, matching the characteristic impedance of the listed cable types. The 200 MHz upper frequency limit is the connector's own ceiling — above that, the geometry of the FME interface introduces a mismatch that degrades return loss. For sub-200 MHz applications (LMR trunking, VHF/UHF telemetry, cellular up to 4G bands), this plug delivers a clean signal path with no insertion loss spec needed.
