The Amphenol RF 192113 is a between-series adapter converting an SMA plug (male pin) to an FME plug (male pin) in a straight, in-line body. It is built for RF signal chains where a 50 Ohm impedance path must be maintained across the transition from the smaller SMA interface to the larger, keyed FME interface.
RF Performance and the 1 GHz Ceiling
The 1 GHz upper limit means the adapter is usable for applications such as cellular (700–900 MHz bands), ISM-band equipment (915 MHz, 2.4 GHz is outside the range), and legacy GPS (1.575 GHz is above the limit — the adapter will pass the signal but with degraded return loss above 1 GHz). For systems operating above 1 GHz, a wider-bandwidth adapter is needed.
Construction and Environmental Reach
The brass body with nickel finish gives the adapter corrosion resistance suitable for indoor and sheltered outdoor equipment. The gold-plated centre contacts resist oxidation over repeated mating cycles — important for field-service adapters that may be connected and disconnected during testing or reconfiguration.
Mating Interface: SMA and FME Gender
The SMA end is a plug with a male pin — it mates with an SMA jack (female) on a cable or bulkhead. The FME end is also a plug with a male pin — it mates with an FME jack (female). Both ends use threaded coupling (threaded, threaded) for a secure, vibration-resistant connection. The straight body keeps the cable axis aligned; a right-angle version would be needed for tight-bend installations.
