Skip to main content
2FA1-NBRP-PCB-6 — Amphenol product photo

2FA1-NBRP-PCB-6 Amphenol RF SMB Fakra Plug, 50 Ohm, 4 GHz

MPN2FA1-NBRP-PCB-6
Active

Amphenol RF SMB Fakra plug, Code B, 50 Ohm, 4 GHz, right-angle through-hole, locking ramp, gold-plated brass center contact, tin-plated zinc die-cast body, PTFE dielectric, 1 port, tray.

$4.9700Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

2FA1-NBRP-PCB-6 Technical Specifications
ParameterValue
Mounting typeThrough Hole, Right Angle
Connector typePlug, Male Pin
Fastening typeLocking Ramp
Frequency - max4 GHz
Operating temperature-65°C~165°C
Body materialZinc Die Cast
Housing colorCream
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBrass
PackageTray
FeaturesCode B
Impedance50Ohm
Body finishTin
Mating cycles100
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

Right-angle Fakra plug, Code B, rated to 4 GHz

The Amphenol RF 2FA1-NBRP-PCB-6 is a Code B SMB/Fakra plug with a single male pin, designed for right-angle through-hole PCB mounting. It carries the 50 Ohm impedance standard for automotive RF interconnects and is rated to 4 GHz maximum frequency. The locking ramp fastening type gives it a positive mechanical latch beyond what a standard snap-on SMB provides — meaning it won't vibrate loose in a vehicle harness. A 100-cycle mating life, gold-plated brass center contact, and PTFE dielectric round out the signal path. The tin-plated zinc die-cast body and cream housing color identify this as the Code B keying variant in the 2FA1 series.

Termination and mounting checklist

The shield termination is solder — no crimp ferrule or board-lock retention beyond the through-hole joints.

Frequently asked questions

What is the frequency range of 2FA1-NBRP-PCB-6?

The 2FA1-NBRP-PCB-6 is rated to 4 GHz maximum frequency at 50 Ohm impedance.