Skip to main content
Amphenol 3FA1-NASJ-C01E6

Amphenol RF 3FA1-NASJ-C01E6 SMB/Fakra Jack, 50 Ohm, 3 GHz

MPN 3FA1-NASJ-C01E6
Active

Amphenol RF SMB/Fakra jack, 50 Ohm, 1 port, IP67, free-hanging, crimp shield, solder contact, for RG-174/188/316 cable, 3 GHz max, 100 mating cycles.

$3.1926 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

3FA1-NASJ-C01E6 key specifications
ParameterValue
MountingFree Hanging (In-Line)
Connector typeJack, Female Socket
Fastening typeLatch Lock
Frequency - max3 GHz
IP ratingIP67 - Dust Tight, Waterproof
Cable groupRG-174, 188, 316
Operating temperature-40°C ~ 85°C
Body materialZinc Die Cast
Housing colorBlack, Jet
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialPhosphor Bronze
PackageTray

All specifications

3FA1-NASJ-C01E6 additional specifications
ParameterValue
FeaturesCode A
Impedance50 Ohms
Body finishTin
Mating cycles100
Number of ports1
Shield terminationCrimp
Contact terminationSolder
Center contact platingGold

Product details

50 Ohm SMB/Fakra Jack for RG-174-Class Coax, Sealed to IP67

The 50 Ohm impedance and 3 GHz maximum frequency suit it for GPS, cellular, and short-range wireless antenna feeds where the signal path needs a weatherproof seal. The IP67 rating means the mated pair stays dust-tight and survives temporary submersion — the latch lock and the O-ring on the interface keep moisture out when the connector is mated to the matching plug.

Cable Fit and Termination — RG-174, 188, 316, Crimp Shield, Solder Centre

This jack accepts the three most common small-diameter 50 Ohm coax cables: RG-174, RG-188, and RG-316.

Sealed Build — Zinc Die-Cast Body with PTFE Dielectric

The IP67 seal is the main differentiator here: if the harness runs through a washdown zone, a splash-prone engine bay, or an outdoor antenna mast, this jack keeps the signal path dry when mated.

MPN
3FA1-NASJ-C01E6