Amphenol ICC (FCI) Quickie™ series, 40-position dual-row 0.100" (2.54mm) pitch, right-angle through-hole male pin header, shrouded with latch lock/eject hooks, 30µin gold GXT™ contact finish.
| Parameter | Value |
|---|---|
| Series | Quickie™ |
| Gender | Male Pin |
| Mounting type | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Latch Lock/Eject Hooks |
| Contact material | Phosphor Bronze Alloy |
| Insulation color | Blue |
| Insulation height | 0.681\" (17.30mm) |
| Insulation material | Polybutylene Terephthalate (PBT), Glass Filled |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tray |
| Features | Keying Slot, Mounting Flange |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Circular |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 40 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact length - post | 0.105\" (2.67mm) |
| Contact finish - mating | Gold or Gold, GXT™ |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
If you are re-pinning a harness on site, the contact interface is not the first thing to wear out. The keying slot prevents cross-mating with a different circuit count or key position.
The latch lock/eject hooks on the header engage with the corresponding slots on the mating housing — if your existing harness uses a Quickie™ receptacle, this header is a drop-in fit for the board side.
The mating half is a Quickie™ series IDC socket or crimp receptacle with 40 positions, dual-row, 0.100" pitch. The latch lock/eject hooks on this header engage with the corresponding slots on the receptacle housing.
The current rating is not listed in the available specifications. The 30 µinch gold GXT™ contact finish typically supports the series-rated current, but the exact value should be confirmed from the full datasheet or by testing under your specific derating conditions.