Amphenol RF SMA jack, female socket, 50 Ohm, 26.5 GHz max, 1 port, flange mount, board edge/end launch, solder termination, threaded, 170 V, 500 mating cycles, -65°C to 165°C, Bulk.
| Parameter | Value |
|---|---|
| Mounting | Board Edge, End Launch |
| Connector type | Jack, Female Socket |
| Fastening type | Threaded |
| Voltage rating | 170 V |
| Frequency - max | 26.5 GHz |
| Mounting feature | Flange |
| Operating temperature | -65°C~165°C |
| Package | Bulk |
| Impedance | 50Ohm |
| Mating cycles | 500 |
| Number of ports | 1 |
| Shield termination | Solder |
| Contact termination | Solder |
The 26.5 GHz upper frequency limit is the headline spec — it tells you the connector will pass signals cleanly through the entire SMA band and a bit beyond, up to the point where the interface geometry starts to limit.
The flange has holes for screw mounting, so the mechanical load is taken off the solder joints, which is important in high-vibration or cable-strain environments.
The 901-10513-1 is available to order through independent distribution. Submit an RFQ for current pricing and lead time — availability is confirmed at quote time.
Yes, this is a standard SMA jack (female socket) with threaded coupling, so it mates with any SMA plug (male pin) that follows the MIL-STD-348 interface. The 50 Ohm impedance and 26.5 GHz rating are standard for the SMA series.