50 Ohm SMA Jack, Sealed for Outdoor RF Runs
The 901-10743: Rated IP67 when mated, it seals the RF path against rain, washdown, and condensation — a step up from the unsealed SMA connectors common on indoor test leads. This jack is terminated to RG-316 double-braid coaxial cable via a crimp shield and solder centre contact.
6 GHz Bandwidth, 500 Mating Cycles
The 901-10743 is rated to 6 GHz maximum frequency — a practical limit for the SMA interface with this cable group and termination method.
Cable Group: RG-316 Double Braid
This jack is specifically designed for RG-316 double-braid coaxial cable. Using a different cable group — say RG-178 or RG-405 — changes the impedance match and shield termination method. For RG-178, the sibling 901-10742 is the correct fit. For RG-405 semi-rigid, the 901-10745 uses a solder shield termination and a gold body finish.
Panel Mount Bulkhead with Front Side Nut
This is a standard SMA bulkhead installation; the IP67 seal relies on an O-ring (not detailed in the spec but implied by the rating) that compresses between the connector body and the panel face. The fastening type is threaded, consistent with the SMA interface standard.