Skip to main content
Log in
901-10797 — Amphenol product photo
Amphenol

Amphenol RF 901-10797 SMA Jack, IP67, 50 Ohm, 7.1 GHz

MPN901-10797
Active

Amphenol RF SMA jack, female socket, bulkhead front-side nut mount, 50 Ohm, DC to 7.1 GHz, IP67, crimp termination, 1.32 mm coaxial cable, gold body and center contact, 500 mating cycles.

$16.0700Ref. price · indicative, final on quote
901-10797 datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

901-10797 Technical Specifications
ParameterValue
Mounting typePanel Mount
Connector typeJack, Female Socket
Fastening typeThreaded
Voltage rating335 V
Frequency - max7.1 GHz
Ingress protectionIP67 - Dust Tight, Waterproof
Mounting featureBulkhead - Front Side Nut
Cable group1.32mm Coaxial Cable
Operating temperature-65°C ~ 165°C
Body materialBrass
Housing colorNatural
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBeryllium Copper
PackageBag
Impedance50 Ohms
Body finishGold
Mating cycles500
Number of ports1
Shield terminationSolder
Contact terminationCrimp
Center contact platingGold

Product details

SMA Jack, Sealed for Outdoor RF Runs

The 901-10797: The IP67 rating means the mated interface is dust-tight and protected against temporary water immersion, so this connector belongs on an outdoor enclosure, a marine electronics box, or a washdown-area panel where a standard unsealed SMA would corrode or leak.

Crimp Termination for 1.32 mm Coax

Contact termination is crimp for the centre pin, and the shield terminates by solder. The cable group is specified for 1.32 mm coaxial cable. The 500 mating cycles rating is solid for a threaded RF connector.

Frequently asked questions

Where can I buy the Amphenol RF 901-10797?

The 901-10797 is available to order through independent distribution. Submit an RFQ for current pricing and lead time — availability is confirmed at quote time.

What cables are compatible with the 901-10797?

The 901-10797 is specified for 1.32 mm coaxial cable. The crimp centre contact and shield solder termination are sized for that cable group; using a different diameter requires verifying the crimp die and centre-contact fit.