Skip to main content
Log in
919-NM109J-51P — Amphenol product photo
Amphenol

Amphenol RF 919-NM109J-51P MCX Jack, 50 Ohm, 6 GHz

MPN919-NM109J-51P
Active

Amphenol RF MCX jack, female socket, 50 Ohm, 6 GHz, snap-on, through-hole, gold beryllium copper body, non-magnetic, 500 mating cycles, 0.1 dB insertion loss.

$12.1500Ref. price · indicative, final on quote
919-NM109J-51P datasheet
StockIn Stock (26)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

919-NM109J-51P Technical Specifications
ParameterValue
Mounting typeThrough Hole
Connector typeJack, Female Socket
Fastening typeSnap-On
Frequency - max6 GHz
Operating temperature-40°C~155°C
Body materialBeryllium Copper
Housing colorGold
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBeryllium Copper
PackageBulk
FeaturesNon-Magnetic
Impedance50Ohm
Body finishGold
Mating cycles500
Insertion loss0.1dB
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

MCX Snap-On Jack for Non-Magnetic RF Paths

The 919-NM109J-51P: The snap-on fastening type gives a quick, positive mate with the matching MCX plug — no coupling nut to torque, just push until it clicks. The beryllium copper body and centre contact, both gold-plated, are specified as non-magnetic, which makes this jack a fit for MRI-adjacent equipment, NMR probes, or any instrumentation where ferrous materials would distort the field.

Rated to 6 GHz max frequency. The 0.1 dB insertion loss at 6 GHz is a tight spec.

Beryllium Copper and Non-Magnetic Construction

Beryllium copper is the material for both the body and the centre contact. It gives good spring properties for the snap-on retention and the socket beam, and its non-magnetic characteristic is the reason this part carries the NM suffix. The -40°C to 155°C operating range covers industrial and lab environments, including autoclave or bake-out cycles if the connector is left unmated.

Frequently asked questions

What connector mates with 919-NM109J-51P?

This is an MCX jack (female socket) with a snap-on fastening type. It mates with any standard MCX plug (male pin) that uses the same snap-on interface. The mating half must also be a 50 Ohm MCX connector to maintain impedance.