Amphenol RF AFI series, 920-192J-71A, jack female socket, 75 Ohm, 6 GHz, right-angle through-hole, solder termination, gold center contact, 200 mating cycles.
| Parameter | Value |
|---|---|
| Series | AFI |
| Mounting | Through Hole, Right Angle |
| Connector type | Jack, Female Socket |
| Fastening type | Snap-On |
| Frequency - max | 6 GHz |
| Operating temperature | -65°C~165°C |
| Body material | Brass |
| Housing color | Silver, Matte |
| Dielectric material | Polymethylpentene (PMP); Polytetrafluoroethylene (PTFE) |
| Center contact material | Beryllium Copper |
| Package | Tray |
| Features | Smooth Bore |
| Parameter | Value |
|---|---|
| Impedance | 75Ohm |
| Body finish | Tin |
| Mating cycles | 200 |
| Number of ports | 1 |
| Shield termination | Solder |
| Contact termination | Solder |
| Center contact plating | Gold |
The 920-192J-71A: The 75 Ohm impedance targets video distribution, broadband data, and other RF systems where standard 50 Ohm would be a mismatch. Rated to 6 GHz, this connector covers the full DOCSIS and satellite IF bands without a roll-off concern.
The 200 mating cycles are typical for a snap-on RF connector — enough for field-service reconnects but not a high-cycle test-port duty.
The 920-192J-71A is a female AFI jack; it mates with an AFI series male plug that has a snap-on fastening. The mating half carries the male center pin and a smooth-bore outer contact to match this jack's interface.
The 920-192J-71A is a PCB-mount jack with solder termination — it does not directly accept a cable. For an RG6 cable connection, you would use an AFI series cable plug that mates with this jack and is crimped or compression-terminated to the RG6 coax.