Skip to main content
A-2JA — Amphenol product photo

Amphenol RF A-2JA AMMC Jack, 50 Ohm, 3 GHz, SMT, Silver Body

MPNA-2JA
Active

Amphenol RF AMMC series jack, male pin, 50 Ohm, 3 GHz, 500 V, SMT, snap-on, gold centre contact, silver body, 1 port, Tape & Reel / Cut Tape.

$1.1700Ref. price · indicative, final on quote
StockIn Stock (30)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

A-2JA Technical Specifications
ParameterValue
Mounting typeSurface Mount
Connector typeJack, Male Pin
Fastening typeSnap-On
Voltage rating500 V
Frequency - max3 GHz
Operating temperature-40°C~90°C
Body materialPhosphor Bronze
Housing colorBlack
Dielectric materialLiquid Crystal Polymer (LCP)
Center contact materialBrass
PackageTape & Reel (TR); Cut Tape (CT)
Impedance50Ohm
Body finishSilver
Mating cycles20
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

50 Ohm AMMC Jack for Board-Level RF Links

The Amphenol RF A-2JA is a 50 Ohm AMMC-series jack with a male centre pin, designed for surface-mount board-level RF interconnects. It carries a 500 V voltage rating and a 3 GHz maximum frequency, suiting it for moderate-bandwidth RF paths where the board launch needs a controlled 50 Ohm impedance. Gold plating on the centre contact and a Liquid Crystal Polymer dielectric keep the signal path stable across the -40°C to 90°C operating range.

20 Mating Cycles — A Semi-Permanent RF Connection

Rated for 20 mating cycles, this jack is not built for frequent disconnect-reconnect duty. The low cycle count points to a design intended for one-time or occasional field service — the connector gets soldered to the board, mated to its counterpart, and stays. If your application requires repeated mating (test points, modular swaps), the 30-cycle A-1JB peer or the 100-cycle SMPM option offer more headroom. The silver body finish on phosphor bronze provides the RF shield, with shield termination through solder.

Frequently asked questions

What is the impedance and frequency range of the A-2JA?

The A-2JA is a 50 Ohm jack rated to 3 GHz maximum frequency, making it suitable for moderate-bandwidth RF interconnects.