Skip to main content
Log in
F31W-1A7H1-11016 — Amphenol product photo
Amphenol

F31W-1A7H1-11016 FFC/FPC Connector, 0.50mm Pitch, 16 Pos

MPNF31W-1A7H1-11016
Active

Amphenol ICC (FCI) Aorora F31W FFC/FPC connector, 0.50 mm pitch, 16 positions, vertical one-sided contacts, gold flash, ZIF slide lock, 0.5 A, 50 V, -40°C to 105°C, UL94 V-0 LCP housing.

$0.9000Ref. price · indicative, final on quote
F31W-1A7H1-11016 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

F31W-1A7H1-11016 Technical Specifications
ParameterValue
SeriesAorora F31W
Mounting typeSurface Mount
Cable end typeStraight, Tapered
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Vertical - 1 Sided
Voltage rating50V
Current rating0.5A
Operating temperature-40°C~105°C
Housing colorNatural
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP), Glass Filled
Actuator materialPolyamide (PA9T), Nylon 9T, Glass Filled, Halogen Free
Height above board0.167\" (4.25mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles30
Contact finishGold
Locking featureSlide Lock
FFC, FCB thickness0.30mm, 0.33mm
Positions16
Contact finish thickness1.97µin (0.050µm)

Product details

The F31W-1A7H1-11016: It uses a zero insertion force (ZIF) slide lock mechanism — the actuator slides to clamp the cable, not flip up — which keeps the profile low and the cable held without a secondary latch. The contacts are vertical and one-sided, meaning the FFC pads face the same side as the actuator; the cable end can be straight or tapered, accommodating 0.30 mm or 0.33 mm thick flex circuits. The 30 mating cycles reflect the gold flash thickness — this is a signal-level interconnect for one-time assembly or occasional rework, not high-cycle field disconnect. The height above board is 4.25 mm, which fits tight z-height budgets in mezzanine or board-edge layouts.

This 16-position connector sits between the 10-position (F31W-1A7H1-11010) and 12-position (F31W-1A7H1-11012) versions, and below the 24-position (F31W-1A7H1-11024) variant.

RoHS compliant. Quoted to order against your BOM quantity — availability and current pricing confirmed at quote time.

Frequently asked questions

Does F31W-1A7H1-11016 support ZIF with slide lock?

Yes. The slide lock actuator clamps the FFC without insertion force — no lever to flip, just a sliding action that holds the cable in place. The locking feature is listed as Slide Lock, and the connector type is Zero Insertion Force (ZIF).