Amphenol ICC (FCI) Aorora F32D series, F32D-1A7Y1-21050 — 0.50 mm pitch, 50-position, right-angle SMT ZIF connector, gold-plated bottom contacts, slide lock actuator, 0.5 A per contact, 50 V rating.
| Parameter | Value |
|---|---|
| Series | Aorora F32D |
| Mounting | Surface Mount, Right Angle |
| Cable end type | Straight |
| Flat flex type | FFC, FPC |
| Connector (Contact type) | Contacts, Bottom |
| Voltage rating | 50V |
| Current rating | 0.5A |
| Operating temperature | -40°C~105°C |
| Housing color | Natural |
| Actuator color | Black |
| Contact material | Phosphor Bronze |
| Housing material | Liquid Crystal Polymer (LCP), Halogen Free |
| Parameter | Value |
|---|---|
| Actuator material | Polyamide (PA9T), Nylon 9T, Halogen Free |
| Height above board | 0.081\" (2.05mm) |
| Material flammability rating | UL94 V-0 |
| Pitch | 0.020\" (0.50mm) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Solder Retention, Zero Insertion Force (ZIF) |
| Termination | Solder |
| Mating cycles | 30 |
| Contact finish | Gold |
| Locking feature | Slide Lock |
| FFC, FCB thickness | 0.30mm, 0.33mm |
| Positions | 50 |
| Contact finish thickness | 3.00µin (0.076µm) |
Right-angle SMT mounting with solder retention keeps the connector anchored during reflow and resists shear from cable strain. The 2.05 mm height above board fits tight z-height budgets in portable or panel-mount equipment.
The slide-lock actuator clamps the cable without a secondary TPA — the ZIF mechanism eliminates insertion force on the FPC pads, reducing pad lift risk during assembly.
The F32D-1A7Y1-21050 carries 50 positions.
Yes — it uses a zero-insertion-force (ZIF) slide-lock actuator. The actuator opens the contact beams so the FPC slides in without force, then the slide lock clamps the cable in place.
Pitch is 0.020" (0.50 mm) with 50 positions. This is a high-density signal connector for FFC/FPC ribbon cables.