Skip to main content
F32Q-1A7H1-11026 — Amphenol product photo

F32Q-1A7H1-11026 FFC/FPC Connector, 0.50mm Pitch, 26 Pos

MPNF32Q-1A7H1-11026
Active

Amphenol ICC (FCI) Aorora F32Q series FFC/FPC connector, 26 positions, 0.50mm pitch, 0.5A per contact, 50V, ZIF slide lock, right-angle SMT, gold-plated contacts, UL94 V-0 LCP housing.

$0.8100Ref. price · indicative, final on quote
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

F32Q-1A7H1-11026 Technical Specifications
ParameterValue
SeriesAorora F32Q
Mounting typeSurface Mount, Right Angle
Cable end typeStraight
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Top
Voltage rating50V
Current rating0.5A
Operating temperature-40°C~105°C
Housing colorNatural
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP), Glass Filled
Actuator materialPolyamide (PA9T), Nylon 9T, Glass Filled, Halogen Free
Height above board0.079\" (2.00mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles30
Contact finishGold
Locking featureSlide Lock
FFC, FCB thickness0.30mm, 0.33mm
Positions26
Contact finish thickness1.97µin (0.050µm)

Product details

This is a signal-only interconnect: 0.5A per contact and 50V rating. For power delivery above 0.5A, look at a higher-current series within the Aorora family or a separate power connector.

ZIF Slide Lock and 30 Mating Cycles — Designed for Set-and-Forget

This is a one-time-termination workflow: the 30 mating cycle rating tells you the connector is built for infrequent disconnects — think final assembly and occasional field replacement, not repeated rework. The slide lock holds the cable against vibration better than a flip-lock, but the low cycle count means it is not a candidate for a service loop that gets disconnected quarterly.

Frequently asked questions

What FFC thickness does F32Q-1A7H1-11026 accept?

0.30mm or 0.33mm. The connector does not accept 0.5mm FPC; verify your cable thickness before ordering.