Skip to main content
Log in
F32Q-1A7H1-11033 — Amphenol product photo
Amphenol

F32Q-1A7H1-11033 FFC/FPC Connector, 33 Pos, 0.50mm Pitch

MPNF32Q-1A7H1-11033
Active

Amphenol ICC (FCI) Aorora F32Q series FFC/FPC connector, 33 positions, 0.50mm pitch, right-angle SMT, ZIF slide lock, gold-plated contacts, 0.5A, 50V, UL94 V-0.

$0.9300Ref. price · indicative, final on quote
F32Q-1A7H1-11033 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

F32Q-1A7H1-11033 Technical Specifications
ParameterValue
SeriesAorora F32Q
Mounting typeSurface Mount, Right Angle
Cable end typeStraight
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Top
Voltage rating50V
Current rating0.5A
Operating temperature-40°C~105°C
Housing colorNatural
Actuator colorGray
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP), Glass Filled
Actuator materialPolyamide (PA9T), Nylon 9T, Glass Filled, Halogen Free
Height above board0.079\" (2.00mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles30
Contact finishGold
Locking featureSlide Lock
FFC, FCB thickness0.33mm
Positions33
Contact finish thickness1.97µin (0.050µm)

Product details

33-Position FFC/FPC Connector for Dense Signal Routing

The F32Q-1A7H1-11033 is a 33-position, 0.50mm pitch FFC/FPC connector from the Aorora F32Q series by Amphenol ICC (FCI).

ZIF Slide Lock and Contact Interface

The ZIF slide-lock actuator (gray polyamide PA9T, glass-filled, halogen-free) opens to accept the FFC, then slides closed to clamp the contacts against the cable pads. Gold contact finish at 1.97µin (0.050µm) over phosphor bronze — the thin gold layer is adequate for the 30-cycle rated life in a one-time assembly or infrequent service scenario. The housing is natural LCP, glass-filled, rated UL94 V-0.

Frequently asked questions

Where can I find the F32Q-1A7H1-11033 datasheet?

The datasheet for the F32Q-1A7H1-11033 is available from Amphenol ICC (FCI) under the Aorora F32Q series. The base product number is F32Q-1A7H1. Request the full drawing through the RFQ process.

Is F32Q-1A7H1-11033 compatible with standard 0.5mm FFC cables?

Yes. The connector accepts FFC or FPC cables with 0.50mm pitch and 0.33mm thickness. The cable end type is straight, and the contacts are top-side — the cable pads must face up when inserted into the ZIF slot.