Skip to main content
Log in
F3311A7H121004E200 — Amphenol product photo
Amphenol

F3311A7H121004E200 Amphenol ICC (FCI) FFC/FPC Connector

MPNF3311A7H121004E200
Active

Amphenol ICC (FCI) Aorora F331 series, F3311A7H121004E200 — 4-position, 0.50mm pitch, right-angle SMT FFC/FPC connector, ZIF flip-lock actuator, gold-plated contacts, 0.5 A, 50 V, UL94 V-0 LCP housing.

$0.3900Ref. price · indicative, final on quote
F3311A7H121004E200 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

F3311A7H121004E200 Technical Specifications
ParameterValue
SeriesAorora F331
Mounting typeSurface Mount, Right Angle
Cable end typeStraight
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Top and Bottom
Voltage rating50V
Current rating0.5A
Operating temperature-55°C ~ 85°C
Housing colorNatural
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP)
Actuator materialPolyamide (PA9T), Nylon 9T
Height above board0.040\" (1.02mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles20
Contact finishGold
Locking featureFlip Lock, Backlock
FFC, FCB thickness0.30mm
Positions4
Contact finish thickness3.00µin (0.076µm)

Product details

Board-fit and routing — 0.50 mm pitch, right-angle SMT

The F3311A7H121004E200: The 0.50 mm pitch sets the board footprint and the trace fan-out density — at this pitch, the per-contact current ceiling is 0.5 A, limited by the contact beam cross-section and the housing temperature rise.

ZIF actuator and contact interface

The flip-lock, backlock actuator is a zero-insertion-force design — the FFC slides in without force, then the actuator clamps the contacts against the ribbon pads. Contacts are phosphor bronze with 3.00 µinch gold finish on both top and bottom — the dual-sided contact wipes the FFC pads on insertion. At 20 mating cycles, this flash gold is adequate for a single assembly or one rework cycle in a controlled environment.

ROHS3 compliant, UL94 V-0 rated LCP housing.

Frequently asked questions

Does F3311A7H121004E200 have a flip lock?

Yes, the locking feature is a flip lock, backlock actuator — a zero-insertion-force mechanism that clamps the FFC after insertion.