Skip to main content
Log in
F3311A7H121024E200 — Amphenol product photo
Amphenol

F3311A7H121024E200 Amphenol ICC FCI 24-Pos 0.5mm FFC/FPC

MPNF3311A7H121024E200
Active

Amphenol ICC (FCI) Aorora F331 series FFC/FPC connector, 24 positions, 0.50 mm pitch, right-angle SMT, ZIF flip-lock actuator, gold-plated contacts rated 0.5 A at 50 V, UL94 V-0 housing.

$0.7900Ref. price · indicative, final on quote
F3311A7H121024E200 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

F3311A7H121024E200 Technical Specifications
ParameterValue
SeriesAorora F331
Mounting typeSurface Mount, Right Angle
Cable end typeStraight
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Top and Bottom
Voltage rating50V
Current rating0.5A
Operating temperature-55°C ~ 85°C
Housing colorNatural
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP)
Actuator materialPolyamide (PA9T), Nylon 9T
Height above board0.040\" (1.02mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles20
Contact finishGold
Locking featureFlip Lock, Backlock
FFC, FCB thickness0.30mm
Positions24
Contact finish thickness3.00µin (0.076µm)

Product details

The F3311A7H121024E200: This is a 24-position, 0.50 mm pitch FFC/FPC connector from the Aorora F331 series by Amphenol ICC (FCI). It uses a zero-insertion-force (ZIF) flip-lock actuator — lift the black polyamide (PA9T) latch, slide in the 0.30 mm-thick FFC, then snap the latch closed. The mated height above the board is 1.02 mm — low enough for tight stack-ups in handheld or portable equipment.

What the 3.00 µin gold finish means for your application

The contact finish is 3.00 µin (0.076 µm) gold over phosphor bronze. That is a light-duty plating — rated for 20 mating cycles minimum.

Frequently asked questions

What is the pitch of F3311A7H121024E200?

The pitch is 0.020" (0.50 mm). This is the standard 0.50 mm FFC/FPC pitch — confirm your cable's conductor spacing matches before ordering.

Does F3311A7H121024E200 have a ZIF mechanism?

Yes, it uses a zero-insertion-force (ZIF) flip-lock actuator. Lift the black latch, insert the 0.30 mm-thick FFC, then close the latch to lock the cable in place. No insertion force is required.