Skip to main content
Log in
F518-1A7A1-11006 — Amphenol product photo
Amphenol

F518-1A7A1-11006 Amphenol ICC (FCI) FFC/FPC Connector

MPNF518-1A7A1-11006
Active

Amphenol ICC (FCI) Aorora F518 series, 6-position FFC/FPC connector, 1.00 mm pitch, top-contact, right-angle SMT, tin-plated phosphor bronze contacts, 0.5 A, 50 V, -40°C to 105°C.

$0.3600Ref. price · indicative, final on quote
F518-1A7A1-11006 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

F518-1A7A1-11006 Technical Specifications
ParameterValue
SeriesAorora F518
Mounting typeSurface Mount, Right Angle
Cable end typeStraight
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Top
Voltage rating50V
Current rating0.5A
Operating temperature-40°C~105°C
Housing colorBlack
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP), Glass Filled
Height above board0.118\" (3.00mm)
Material flammability ratingUL94 V-0
Pitch0.039\" (1.00mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention
TerminationSolder
Mating cycles30
Contact finishTin
FFC, FCB thickness0.30mm, 0.33mm
Positions6
Contact finish thickness80.0µin (2.03µm)

Product details

1.00 mm Pitch, 6-Position FFC/FPC Connector — Top-Contact, Right-Angle SMT

The F518-1A7A1-11006: This is a 6-position FFC/FPC connector from the Amphenol ICC (FCI) Aorora F518 series, with a 1.00 mm pitch and top-contact configuration. The contacts are tin-plated phosphor bronze with 80.0 µin (2.03 µm) of tin, rated for 30 mating cycles. That cycle count is typical for internal harnesses or one-time assembly — not for frequent field reconnection. The 0.5 A per-contact current rating suits signal-level circuits; a flipped flex or wrong cable thickness will short the wrong row. The housing is black LCP, glass-filled, rated UL94 V-0. Solder retention tabs hold the connector during reflow.

Cable Thickness and Orientation — Match the Actuator

The cable end must be straight (not angled) and the contacts are on the top side — a bottom-contact cable folded for top-contact will short the wrong row. The actuator must match the cable thickness; a 0.30 mm cable in a 0.33 mm slot may lose retention.

It is RoHS compliant.

Frequently asked questions

What cable thickness does F518-1A7A1-11006 accept?

It accepts FFC or FPC cables 0.30 mm or 0.33 mm thick. The cable end must be straight, and the contacts are on the top side — a bottom-contact cable folded for top-contact will short the wrong row.

What is the closest alternative to F518-1A7A1-11006?

The F518-1A7A1-11005 (5 positions) and F518-1A7A1-11008 (8 positions) are direct siblings with the same pitch, height, contact finish, and current rating. The 4-position F518-1A7A1-11004 also matches but only lists 0.33 mm cable thickness. No functional second-source exists outside the F518 series.

How can I order F518-1A7A1-11006 or check stock?

This part is sourced per RFQ through independent distribution.