Amphenol ICC (FCI) Aorora F51L series, 22-position, 1.00mm pitch, right-angle SMT ZIF FFC/FPC connector, gold-plated contacts, flip-lock actuator, 0.5A, 50V, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | Aorora F51L |
| Mounting | Surface Mount, Right Angle |
| Cable end type | Straight, Tapered |
| Flat flex type | FFC, FPC |
| Connector (Contact type) | Contacts, Bottom |
| Voltage rating | 50V |
| Current rating | 0.5A |
| Operating temperature | -40°C~105°C |
| Housing color | Natural |
| Actuator color | Black |
| Contact material | Phosphor Bronze |
| Housing material | Liquid Crystal Polymer (LCP) |
| Parameter | Value |
|---|---|
| Actuator material | Polyamide (PA9T), Nylon 9T, Halogen Free |
| Height above board | 0.100\" (2.54mm) |
| Material flammability rating | UL94 V-0 |
| Pitch | 0.039\" (1.00mm) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Solder Retention, Zero Insertion Force (ZIF) |
| Termination | Solder |
| Mating cycles | 30 |
| Contact finish | Gold |
| Locking feature | Flip Lock |
| FFC, FCB thickness | 0.30mm, 0.33mm |
| Positions | 22 |
| Contact finish thickness | 1.97µin (0.050µm) |
The F51L-1A7H1-11022 is a 22-position, 1.00mm pitch FFC/FPC connector from the Amphenol ICC Aorora F51L series. Gold-plated phosphor bronze contacts (1.97µin gold over nickel) handle 0.5A per circuit at 50V. That gold layer is thin — rated for 30 mating cycles — so it's fine for a set-and-forget interconnect inside a device, not a frequent disconnect point in the field.
Yes — it uses a flip-lock ZIF (zero insertion force) actuator. The actuator opens to accept the FFC/FPC without force, then flips down to clamp the cable in place.