Skip to main content
Log in
F51L-1A7H1-11028 — Amphenol product photo
Amphenol

F51L-1A7H1-11028 Amphenol ICC FFC/FPC Connector, 28 Pos

MPNF51L-1A7H1-11028
Active

Amphenol ICC (FCI) Aorora F51L, 28-position FFC/FPC connector, 0.039" (1.00mm) pitch, right-angle SMT, ZIF flip-lock, gold-plated bottom contacts, 0.5 A, 50 V.

$0.7800Ref. price · indicative, final on quote
F51L-1A7H1-11028 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

F51L-1A7H1-11028 Technical Specifications
ParameterValue
SeriesAorora F51L
Mounting typeSurface Mount, Right Angle
Cable end typeNotched
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Bottom
Voltage rating50V
Current rating0.5A
Operating temperature-40°C~105°C
Housing colorNatural
Actuator colorGray
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP)
Actuator materialPolyamide (PA9T), Nylon 9T, Halogen Free
Height above board0.100\" (2.54mm)
Material flammability ratingUL94 V-0
Pitch0.039\" (1.00mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles30
Contact finishGold
Locking featureFlip Lock
FFC, FCB thickness0.33mm
Positions28
Contact finish thickness1.97µin (0.050µm)

Product details

The F51L-1A7H1-11028: This is a 28-position FFC/FPC connector from the Amphenol ICC Aorora F51L series, built on a 0.039" (1.00mm) pitch. The Zero Insertion Force (ZIF) mechanism with a flip-lock actuator accepts a notched FFC or FPC cable 0.33mm thick. The contact wipe on insertion is handled by the beam, not the cable pad, so the 30 mating cycles rating is a practical ceiling for applications where the cable is disconnected a few times over the product life — think display interconnect or sensor module interface inside an enclosure.

Current, Plating, and Temperature Range

The polyamide (PA9T) actuator is halogen-free.

Frequently asked questions

What FFC/FPC cable thickness does F51L-1A7H1-11028 accept?

It accepts a notched FFC or FPC cable with a thickness of 0.33mm. The ZIF flip-lock actuator secures the cable without requiring insertion force on the pads.