The F51W-1A7H1-11010 is a 10-position, 1.00 mm pitch FFC/FPC connector from the Amphenol ICC Aorora F51W series.
Gold plating at 1.97 µinch (0.050 µm) over phosphor bronze contacts — this is a thin gold flash, rated for 30 mating cycles minimum. For higher cycle counts, a thicker gold option in the series would be needed.
ZIF actuation and cable fit
Zero insertion force (ZIF) with a slide lock mechanism — the actuator slides to clamp the FFC, not flip. The connector accepts 0.33 mm thick FFC with a notched cable end. This is a vertical, 1-sided contact design — the FPC cable traces must face the correct side (contact side down) to mate properly.