1.00 mm Pitch, 20-Position ZIF for Signal-Level FPC Interconnect
Right-angle SMT orientation places the FPC parallel to the board, keeping the z-height to 2.00 mm above the PCB. Gold contact finish at 1.97 µinch over phosphor bronze provides corrosion resistance for the rated 30 mating cycles. The housing is glass-filled LCP rated UL94 V-0, and the actuator is halogen-free glass-filled PA9T.
ZIF Slide Lock and FPC Thickness Compatibility
The ZIF mechanism accepts FPC or FFC with a thickness of 0.33 mm. The slide lock actuator, colored gray, moves laterally to clamp the cable — no secondary latch or TPA is needed. The contact style is top-contact, meaning the FPC pads face upward when the connector is viewed from above. The cable end type is notched — the FPC must have a notch at the insertion end to align with the connector's keying.
No official successor or direct replacement is recorded — the base product number F52Q-1A7H1 covers this configuration. RoHS compliant.