The gold contact finish (1.97 µinch over phosphor bronze) and 30 mating cycles indicate a design for infrequent reconnection, typical of internal harnesses in consumer electronics, industrial controls, or test equipment where the cable is mated once during assembly and rarely cycled again.
Pitch, Positions, and Cable Fit
The 1.00 mm pitch is a common FFC/FPC spacing, but it must match the cable conductor pitch exactly — a 0.5 mm or 1.25 mm cable will not fit. With 30 positions, this connector handles a moderate number of signals. The bottom-contact design means the contact beams touch the cable pads from below, which is typical for right-angle ZIF connectors.
The part is RoHS compliant.