Skip to main content
Log in
FA1-NARJ-C01-0 — Amphenol product photo
Amphenol

Amphenol RF FA1-NARJ-C01-0 SMB Fakra Jack, 50 Ohm, 6 GHz

MPNFA1-NARJ-C01-0
Active

Amphenol RF FA1-NARJ SMB Fakra jack, female socket, right-angle, 50 Ohm, DC-6 GHz, Code A keying, crimp/solder termination, bulk.

$3.0000Ref. price · indicative, final on quote
FA1-NARJ-C01-0 datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

FA1-NARJ-C01-0 Technical Specifications
ParameterValue
Mounting typeFree Hanging (In-Line), Right Angle
Connector typeJack, Female Socket
Fastening typeLatch Lock
Frequency - max6 GHz
Cable groupRG-174, 188, 188A, 316, LMR-100, M17/119-RG174
Operating temperature-40°C~100°C
Body materialBrass
Housing colorBlack, Jet
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBeryllium Copper
PackageBulk
FeaturesCode A
Includes3 pcs - 1 Connector, 1 End Cap, 1 Ferrule
Impedance50Ohm
Body finishNickel
Mating cycles100
Insertion loss0.3dB
Number of ports1
Shield terminationCrimp
Contact terminationSolder
Center contact platingGold

Product details

SMB Fakra Jack for RG-174/316 Coax — Code A Keyed

The Amphenol RF FA1-NARJ-C01-0 is a right-angle SMB Fakra jack, female socket, terminated for RG-174, 188, 188A, 316, and LMR-100 cable groups. It carries the Code A keying variant — the color-coding and mechanical polarization that prevents cross-mating with other Fakra codes in a multi-connector harness.

Cable Prep and Termination — Crimp Shield, Solder Center

Shield termination is crimp; the center contact is solder. That means you strip the coax, crimp the ferrule over the braid, then solder the center conductor into the beryllium copper pin. The PTFE dielectric body handles the -40°C to 100°C operating range without creeping — important for an under-hood or exterior antenna lead.

Mating Cycles and Retention

The right-angle exit keeps the cable routed flat against the panel or module face.

Frequently asked questions

Where can I buy the FA1-NARJ-C01-0 and how is it quoted?

Submit an RFQ for your target quantity and lead time.

What cable types are compatible with FA1-NARJ-C01-0?

The FA1-NARJ-C01-0 is specified for RG-174, 188, 188A, 316, LMR-100, and M17/119-RG174 cable groups. The shield is crimped, the center conductor is soldered.

Does FA1-NARJ-C01-0 come with the end cap and ferrule included?

Yes, the kit includes 3 pieces: 1 connector body, 1 end cap, and 1 ferrule. No separate contact or housing to order — it's a complete termination set for one cable end.

What is the difference between FA1-NARJ-C01-0 and a standard SMB connector?

This is an SMB-style connector with Fakra keying (Code A, black housing). Standard SMB uses a snap-on coupling without color coding or mechanical polarization. The Fakra variant adds a latch lock and keying to prevent cross-mating in multi-connector automotive harnesses.