Skip to main content
FM4-NARP-PCB-1 — Amphenol product photo

Amphenol RF FM4-NARP-PCB-1 Fakra Plug, 50 Ohm, 9 GHz

MPNFM4-NARP-PCB-1
Active

Amphenol RF AUTOMATE™ Fakra plug, Code A, 1 port, 50 Ohm, 9 GHz, through-hole right-angle, male pin, latch lock, gold-plated center contact.

$9.2000Ref. price · indicative, final on quote
StockIn Stock (18)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

FM4-NARP-PCB-1 Technical Specifications
ParameterValue
Mounting typeThrough Hole, Right Angle
Connector typeMiniature Coaxial, Fakra, Quadraxial
Fastening typeLatch Lock
Frequency - max9 GHz
Operating temperature-40°C~105°C
Body materialBrass, Zinc Alloy
Housing colorBlack, Jet
Dielectric materialLiquid Crystal Polymer (LCP)
Center contact materialCopper Alloy
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesCode A
Impedance50Ohm
Body finishTin
Mating cycles25
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

The Amphenol RF FM4-NARP-PCB-1 is a Fakra-style miniature coaxial plug, male pin, with a Code A keying feature. It sits in the AUTOMATE™ series and is designed for single-port RF interconnects in automotive infotainment, telematics, and antenna systems where a 50 Ohm controlled impedance path is required up to 9 GHz.

The 9 GHz max frequency covers current 5G bands and automotive radar comfortably, with headroom for future higher-frequency modules. The latch lock fastening means the plug stays mated under vehicle vibration without relying on a threaded coupling nut. Mating cycles are rated at 25 — enough for a one-time install or occasional field service, but not for repeated daily reconnection. The center contact is gold-plated over copper alloy, which resists corrosion in the under-hood or cabin environment.

Through-hole right-angle mount. Shield and contact terminate by solder.

Frequently asked questions

What is the impedance of FM4-NARP-PCB-1?

The FM4-NARP-PCB-1 is a 50 Ohm connector, standard for automotive RF applications like GPS, satellite radio, and cellular antennas.

What is the mating connector for FM4-NARP-PCB-1?

This is a plug (male pin) that mates with a Fakra Code A receptacle (female socket) of the same keying. The latch lock on the plug engages the receptacle housing for a vibration-resistant connection.

Is FM4-NARP-PCB-1 compatible with RG174 or RG316 cable?

The FM4-NARP-PCB-1 is a PCB-mount connector, not a cable-mount type — it solders directly to the board. For cable termination, look at the Fakra cable plug variants in the same AUTOMATE™ series.